-
Our septic tanks are designated by the Florida Department of Health with Approval Numbers 53-161-03S-C3 (500 gallon), 53-161-04D-C3 (1,050 gallon) and 53-161-06D-C3 (1,250 gallon). Made from rotationally molded, UV-stabilized polyethylene resin, these tanks include a variety of features, including: Ultra-wide reinforced ribbing for exceptional strength Anti-flotation ribbing incorporated into design Shaped to provide load deflection EZset Leveling Cradles Optional Safe,Turn-to-Lock Covers Optional…
-
The EF-4 series effluent filter removes solids down to 1/16″ and greatly extends the life of a septic system. Shown above is the EF-4 Filter. The EF-4 Effluent Filter fits in 4″ Sanitary Tee. Injection molded PolyPro Simple to install – Easy to clean 800 GPD 86 ft. of 1/16″ Filtration
-
Leo Effluent Pumps are designed to transport discharge from a septic tank or aerobic system to a drain field, secondary treatment system, or other discharge point. These pumps can handle some small solids, but not raw sewage. Submersible effluent pumps are designed to handle treated waste water from a septic tank or an aerobic system….
-
FEATURES 2” Discharge with 2” or 3” Vent. Professional Poly-Structural Foam Basin 4” Inlet Hub Professional Poly-Structural Foam Lid 1/2 or 3/4 Horsepower Sewage Pump Quick Connect Check Valve
-
Leo Effluent Pumps are designed to transport discharge from a septic tank or aerobic system to a drain field, secondary treatment system, or other discharge point. These pumps can handle some small solids, but not raw sewage. Submersible effluent pumps are designed to handle treated waste water from a septic tank or an aerobic system….
-
90 Degree Wide Angle Mercury Activated Pump Switch 13 amp, 16/2 SJOW wire, 120/240V, No Plug Controls Pumps up to 1/2HP at 120V and 1HP at 240V Adjustable Pumping Range of 6 to 36 inches For use in water and sewage applications SST Pipe mount assembly included UL Listed. CSA Listed MDI Piggy Back Floats…
-
The MDI Alarm Boxes 20′ system is designed to monitor liquid levels in sump basins, holding tanks, lift stations tanks and many other non-potable water and waste water applications. Comes individually boxed with Cable tie and Instruction sheet. This alarm comes in a Type 4X non-metallic enclosure with external mounting feet and a gasketed door for…
-
Call Terra Environmental Supply for all your PVC septic related needs. Check Valves Elbow Pipe Male T’s Caps and Connectors IF YOU NEED IT WE HAVE IT!
-
Septic Stack™ Pipe Systems For Both Residential & Commercial Trench, Mound, Bed & Other Configurations Septic Stack units allow for exceptional soil contact without the use of gravel. The Septic Stack units disperse effluent into the voids in and around the specially-banded ADS pipe. This pipe is engineered with holes and slots, allowing it to disperse the effluent…
-
The Tuf-Tite septic tank riser was designed to be the perfect replacement part for damaged or inoperable concrete risers. Tuf-Tite risers also make excellent extensions. Added to your existing concrete riser, they help raise the level of your current riser up to the necessary grade for easy maintenance. Designed with exceptional industry standards for durability…
-
Tuf-Tite tank lids are composed of hardened plastic, easily reinforced with concrete and will fit most commercial risers and pipe variations. Tuf-Tite Flat Riser Lid Typical Applications Septic tank access risers Pump basins Access ports IPEX-PVC ribbed pipe Corrugated pipe 24″ nominal diameter Fits 23-5/16″(I.D.) to 25-3/4″(O.D.) Diameter Openings Green color to match landscaping Designed…
-
The Tuf-Tite TAR adapter ring is designed to be attached to the top of your concrete septic tank. This allows you to easily attach Tuf-Tite Risers and/or Tuf-Tite lids to your concrete septic tank.
